QiyangProducts › Atmel 9M10 Development Board(QY-9M10EK)

Qiyang Qiyang Qiyang

Atmel 9M10 Development Board(QY-9M10EK)

Posted 2014/05/22 11:35 AM by Qiyang views: 1245

• Atmel SAMA5D3 CPU, 536MHz ARM Cortex-A5 core ARM v7-A ISC
• With floating point arithmetic unit,64-bit inside Bus architecture and 32-bit wide DDR controller,operation frequency up to 166MHz;
• Can choose different type of processor to get different function combination, optimize costs, and all models PIN compatibility;
• Can expand 7-ch port, 2-ch CAN bus, 2-ch Ethernet interface;
• Whole board runs with high-speed, and power consumption is lower than 1 with functions of low power consumption mode,which is ideal for battery-powered applications;
• Abundant external interfaces, can replace Atmel ARM9 series products, and upgrade the product perfect;
• Support linux 3.6 and android 4.0.

Contact us Leave a message

ParameterSoftware FeaturesOrder InformationDownloads

Core Module is designed by 6-floor PCB; the volume is only card size(74*53mm); together with CPU, 128M DDR2 RAM,128M Nand Flash, 512K DataFLash, 10/100Mbps; using 5V dc power supply, low power consumption and high performance power management function, to achieve the necessary CPU core voltage conversion; Industry standard design, through the high temperature resistant B to B (2*100) connector leads to a variety of commonly used interface resources, in order to offer fast and the secondary development of use for those who do not intend to design the CPU plate themselves, and it’s suitable for the batch used by the user.

Core Module Specifications:

CPU Processor

• ATMEL AT91SAM9M10,ARM926EJ-S core
• 400MHz

DDR RAM Memory

• 256MB DDR2 RAM, 133MH ;32bit data bus

FLASH Storage

• On-board 512K DataFlash(DB45041D)
• On-board 128M*8bits NandFlash (K9F1G08U0B) could change a large capacity or industrial chip according to customer's requirement

Interfaces

• 2*100 pin 0.8mm spacing B to B(the connectors are 350℃ high temperature-tested and seismic-tested)

Other Resources

• DM9161 net chip, support 10M/100M self-adaptive Ethernet with MII mode, more compatible than RMII
• 1.8V, 3.3V, 5.0V voltage input

PCB Specification & Size

• Using 6-layers of PCB high precision process, and has the best electrical properties and anti-jamming performance
• 74 x 53 x 1.5mm

Working Parameters

• Working temperature: -20°C~ 70°C (batch user could customize -40°C~ 85°C)
• Humidity Range: 5%~ 95%, Non-Condensing

Low Power Consumption

• 5V Dc power supply, low power consumption, <1W

Support OS

• Linux2.6.30 + QT2.3 / QT4
• WindowsCE 6.0

QY-9M10B-GP Evaluation Board Resources Introduction:

QY-9M10EK Evaluation Board Device Locations Qiyang
No. Item Function
J3 Earphone output interface Audio output
J4 Line input interface Audio input
J5 MIC input interface MIC input
J6 TFT-LCD, Touch screen Expand LCD interface, with 4-wire touch screen interface
J8 VGA input VGA video output, and display connection
J9 Debug serial port Download, communication
J10 COM 1 2325 reuse
J11 COM 2 2325 reuse
J12 COM 3 RS232
J13 COM 4 RS232
J14 US 2.0 Device High-speed USB(480MHz), used to download program
J15 USB 2.0 Host USB Host
J16 SD card interface 1 SD card storage
J17 SD card interface 2 SD card storage
J18 Ethernet interface 10/100M self-adaptive network
J19 EBI bus interface CPU internal bus
J20 Camera interface COMS interface, used as video collection and GPIO
J21 Matrix keypad 8 x 8 keypad interface, can used as GPIO
J22 SPI interface SPI bus interface
J23 Standard JTAG interface Simulation, debugging
J24 Power interface +12V power supply, support +6 ~+253V wide range voltage
K1 System reset System reset
K2 Wake-up button Sleep state activation
S1 Power switch Power supply control

PCB Specification & Size

• Using four floors of PCB high precision process
• 142.5*112*1.5mm

Working Parameters

• Working temperature: -20°C~ 70°C(batch user could customize -40°C~ 85°C)
• Humidity Range: 5%~ 95%, Non-Condensing

Linux Software Features

Item Content Function
Cross-compiler arm-2007q1-10-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 arm-linux-gcc 4.2
U-boot Version: U-boot 1.3.4 Provided with bootstrap, U-boot source code
Support writing into DataFlash or NandFlash start
Support SAM-BA software with USB writing and TFTP network update
Linux Kernel Version: 2.6.30  
RTC driver, save and restore system time after power off Provided with test program and source code
SPI driver Provided with test program and source code
EBI driver Provided with test program and source code
I2C driver Provided with test program and source code
Audio driver Provided with test program and source code
LCD driver, supporting 320*240, 640*480, 800*600,1024*768 resolution Provided special LCD with debug service
Touch screen driver, supporting 4-wire resistive screen Provided with test program and source code
Serial driver Provided with test program and source code
PWM driver Provided with test program and source code
Buzzer driver Provided with test program and source code
GPIO driver Provided with test program and source code
8*8 matrix keypad driver Provided with test program and source code
USB driver, support mouse, keypad, U disk, WiFi, bluetooth, printer, camera, barcode scanning, etc. Support various USB external devices, provided with debug service
SD card driver Support large capacity SD card storage
File System Jffs2 file system Provided source code
QT Routine QT development environment QT routine
PC Development Environment Provided with ubuntu 10.10 Linux OS, VMware 7.1.4 virtual machine and supporting development environment build manual Convenient for user to next develop

WindowsCE 6.0 Software Features

Item Content Function
Bootloader support writing into DataFlash or NandFlash start Optional
support user-defined boot logo Up to 1024*768 resolution 24 bmp image
BSP Source Code
BSP Open Source RTC driver,save and restore system time after power off Provided with test program and source code
Registry saving, support saving registry information when electricity adjusted Convenient for user to debug
LCD driver, support 320*240, 640*480, 800*600, 1024*768 resolution Provided special LCD with debug service
Touch screen driver, support 4-wire resistive screen Provided with test program and source code
SD card driver, support 2-wire SD card Largest capacity support 4G
Audio driver, support audio input/output and MIC input Provided with test program and source code
Nic driver, 10/100M self-adaptive, can be expanded gigabit nic Provided with test program and source code
PWM driver Provided with test program and source code
I2C driver Provided with test program and source code
SPI driver Provided with test program and source code
232, 485 serial driver test Provided with test program and source code
support 8*8 matrix keypad, also can used as GPIO Provided with test program and source code
USB driver, support mouse, keypad, U disk, printer, WiFi, bluetooth, camera, barcode scanning, etc. Support various USB external devices, provided with debug service
PC Development Environment Provided with supporting VS.NET 2005 development tools, Wince 6.0 plug-in Convenient for user to next develop

QY-9M10P Evaluation Board Software & Technical Support:

• The problems that customer encounter in the process of development on the products
• System cut, according to customer's requirements
• Develop related drivers, according to the demand of customer(another pay)
• Customized development of back plane, according to customers' requirements(another pay)

Order Information:

Item QY-9M10P
Standard Accessories (1)12V/2A power supply (2)1-wire cross serial line (3) CD of DVD development (4)4-wire RS232 serial lines (5)miniUSB wire (6)packing box
DVD resources Linux Compilers Cross-compiler arm-linux-gcc
Tool software Supporting terminal, writing, download tools
Device manual Main component's datasheet of back plane
User manual About all development and use
Image file Bootstarp, u-boot, kernal, image file of file system
Test source code Test routines and source codes of all interfaces
System source code Include bootstrap, u-boot, kernel, file system and QT source code
Packaging library Component packaging library of evaluation board
Windows CE Tool software Supporting terminal, writing, download tools, sync software
Device manual Main components' datasheet of back plane
User manual About all development and use
Image file Firstboot, Eboot, NK image file
Test source code Test routines and source codes of all interfaces
BSP package Related BSP board-level supporting package
SDK Related SDK
Packaging library Component packaging library of evaluation board
Module options(another pay) TTL to LVDS module
TTL to VGA module
Sales hotline 86-571-87858811, 86-571-87858822