CPU Processor
• NXP Freescale I.MX6UL-2 CPU, ARM Cortex-A7 Kernel, CPU frequency reaches up to 528Mhz
SDRAM Memory
• DDR3 SDRAM, be with 512MB capacity;Flash Storage
• 4GB EMMC(8GB Optional)Telecommunication Port
•4-CH RS232:Including 1-ch as debug port, 1-ch 5-wire UART, 2-ch 3-wire UART;
•1-CH USB OTG, 4-CH USB2.0 Host;
•2-CH Industrial 10/100Mbps Ethernet port, with RJ45 port, with ACT,LINK indicator;
•1-CH Mini PCI-E ,with SIM socket, connect to 3G/4G module;
•2-CH CAN Bus port ,with isolation, fully support CAN2.0A and CAN2.0B protocol; •1-CH RS485, with isolation;
•8-ch 12bit ADC.
Display Port
•18-Bit TFT-LCD, resolution reaches up to 1366*768 •VGA port, connect to general monitors.Audio Port
•McASP audio port, dual channel audio output, MIC audio input.Input Port
•4-Wire Resistive Touch Panel port•Camera port, support 8/10/16 Bits CSI image sensor.
Expansion Port
•SIM Card SocketStorage Port
•1-CH TF card socket.Peripherals
•DIP Switch, Reset Button, RTC, Watchdog, BuzzerPower Input
•+12V power, supports +5.5V~+28V wide range voltage.PCB size
•Adopts 4-layer PCB high precisions technology, with better electrical performance and anti-interference performance. •SOM Size:55mm*46mm •Development Kit Size:185mm*110mmTemperature & Humidity Parameters
•Temperature:-20℃~+70℃(Can be updated to industrial level) •Humidity:5%~95%,non-condensingPower Consumption
• <2W
OS Supported
•Linux4.1.15+QT4.8
Freescale i.MX6UL Development Kit Specifications
No. | Item | Function |
---|---|---|
J2 | Ethernet | 100Mbps ethernet |
J3 | Ethernet | 100Mbps ethernet |
J4 | Audio | Binaural audio output port |
J5 | MIC | MIC audio input port |
J6 | USB -OTG | USB OTG, for downloading and debugging. |
J7 | Mini-PCIE | MINI_PCIE, to connect 3G/4G module |
J8 | TTL-LCD | LCD TTL, integrates 4-wire resistive touch panel, integrates PWM. |
J9 | VGA | VGA displayer interface, DB15 female connector. |
J11 | TF Card Slot | TF Card |
J12 | RS485 | RS485 Bus interface |
J13 | ADC | ADC, 8-ch 12 bit precision |
J14 | Debug UART | Debug UART |
J15 | RS232 | RS232, 5-wire |
J16 | RS232 | RS232, 3-wire |
J17 | RS232 | RS232, 3-wire |
J18 | CAN | CAN bus |
J19 | CAN | CAN bus |
J20 | CSI | CSI bus |
USB1 | USB-Host | USB HOST *2 |
J21 | Power Supply | 12V input power |
J22 | Power Connector | +12V power input |
J23 | Power Connector | +12V power input |
BZ1 | Buzzer | Buzzer |
SW1 | Switch | Bootup dial switch |
SW2 | Button | Button |
Compilation Tool |
Cross-compiler [arm-linux-gcc] |
Tool Software |
Supporting terminal, writing, downloading toolds |
Device Manual |
Datasheet of main components in carrier board |
User Manual |
H/W Manual, User Manual, Testing Manual etc. |
Image File |
Image file of MLO,U-BOOT, Kernel, and file system. |
Test Code |
Test path and source code of all interfaces. |
System Code |
Bootloader, kernel, file system, QT source code & madplay |
Schematic |
Schematic for Carrier Board |
Footprint Library |
Footprint Library for Carrier Board |
7 Inch TFT-LCD+RTP |
Model No.: EK700AT9309 |
|
4.3 Inch TFT-LCD |
Model No.:AT043TN24 |
|
WIFI/Bluetooth 4.0 |
Model No.: BL-R8723BT1 |
Pre-Built or Not |
3G Module |
Model No.: Huawei E261 |
|
Model No.: EM820U-MiniPCIE |
|
|
Model No.:UC15-MiniPCIE |
|
|
Model No.: UC20-MiniPCIE |
|
4G Module |
Model No.:SIM7600CE-MiniPCIE |
|
Model No.:EC20 Mini-pcie |
|
|
USB To UART Cable |
Model No.: UGREEN20210/1309051 |
|